Zeck Audio STAC Force180 Guide d'installation télécharger pdf (Page 35)

Rev. 1.00 12-02-13 35/41

Using PVC channel with IPoA

First appeared in build series: 2012-07-18

Mode: pvc ip

Command

Purpose

Step 1

[node](pvc)[vpi/vci]# [no] bind interface

<name> [router]

Binds the IPoA PVC directly to the IP

interface.

Setting up permanent virtual circuits (PVC) for PPPoA

First appeared in build series: 2012-07-18

Mode: port dsl

Command

Purpose

Step 1

[node](prt-dsl)[0/0]#[no] pvc-ppp <vpi> <vci>

Creates a PVC and enters configuration

mode for this PVC. The "no"-variant

deletes the PVC configuration.

Mode: pvc ppp

Step 2

[node](pvc)[vpi/vci]# encapsulation { llc | vc }

Sets the encapsulation to be used.

Optionally select either LLC

encapsulation or VC multiplexing for this

PVC. Default: llc

Using PVC channel with PPPoA

First appeared in build series: 2012-07-18

Mode: pvc ppp

Command

Purpose

Step 1

[node](pvc)[vpi/vci]# [no] bind interface

<name> [router]

node](pvc)[vpi/vci]# [no] bind subscriber

<name>

Binds the PPPoA PVC directly to the IP

interface name in case no authentication

is required.

Binds the PPPoA PVC to the PPP

subscriber name in case authentication

is required.

Step 2

(Optional)

[node](pvc)[vpi/vci]# [no] use profile ppp

<name>

Assigns a PPP profile other than the

default. (default: default)

Step 3

[node](pvc)[vpi/vci]# [no] shutdown

Enables or disables PPPoA session.

(default: disabled)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41

Commentaires sur ces manuels

Pas de commentaire

Zeck Audio STAC Force180 Guide d'installation Page 35

Commentaires sur ces manuels